Month: October 2020

If you are going to install underfloor heating in a new building, or even in a refurbishment project, it will need to be screeded. However, before you can lay a screed there are several processes that need to be undertaken in order to install the underfloor heating correctly and to produce the most efficient form of heat transfer to a room.

If you are going to lay flooring in a building, and most people do (!), it obviously needs to be as flat as possible for people to walk on, perhaps push a push-chair over, or maybe you are building a skate park and people are going to skate on the final floor, but whatever, it needs to be flat.

That is a fair enough question when you are constructing a new building, or even renovating an old one.

Let’s take a look at laying a new lawn. If you had just moved into a property, or had one built, and you wanted a beautiful green lawn with those lovely stripes, where you could sit all afternoon on a sunny day relaxing on a recliner, you would want that lawn flat.

More and more people today are considering installing underfloor heating in a new-build home because of the many advantages that it has over a radiator system.

When creating any form of flooring, whether it is indoors or outdoors, the ultimate aim is always for it to be as flat and level as possible. This applies whether you are installing flooring in a home, in a public building, on a patio, or even in a car park being built for a new shopping centre.

If you are looking to hire floor sanding machines in Hertfordshire – or for that matter anywhere else in England and Wales – then you need to look no further than UK Screeds.

Sometimes in the business of housebuilding, a way of doing things that has been the same for years may suddenly change. It doesn’t happen all that often, because builders are notoriously reluctant to change when things have worked well for years and only tend to do so if there are possible cost or time-savings, or if they are compelled to do so by changes in the law or by architects who have latched on to a new process.

When laying flooring in a new building, or for that matter in a refurbishment project, it is necessary for the subfloor to be as level as possible, and this is achieved by the use of a screed. A screed is a material which can be laid over concrete in order to level out the dips and bumps as far as possible, and for many years has traditionally been made of sand and cement. However, today, calcium sulphate screeds are becoming more and more popular because of the advantages that they have over sand and cement, and they are the screeds that we supply and lay at UK Screeds.