Month: June 2021

When you have underfloor heating, the good news is that it can be used in conjunction with almost any type of floor surface. The best type of flooring is one which has a high thermal conductivity because this will allow the floor to heat up faster, give better heat output, and run more efficiently.

If you are considering installing underfloor heating, whether as part of a renovation project or a new build, there are several things that you need to know. At UK Screeds, as liquid screed contractors in Bristol, we can install your underfloor heating for you as well. There is absolutely no doubt that underfloor heating has many benefits when compared with a radiator system.

Over the course of the last few years, anhydrite screeds have grown enormously in popularity, and with good reason. They have so many advantages over the traditional sand and cement screeds that have been used for years. However, when you are going to use tile as the finishing floor surface there are a few things that you need to take into consideration.

At UK Screeds we are often asked about the benefits of liquid screeds as compared with the traditional one of sand and cement, and the answer is that there are very many. In fact, there are so many that it is difficult to know where to begin.

When you are in the process of constructing a building, there are very many things to consider. One of the most important is the flooring because it will take constant traffic from people walking on it. In some areas, there may be heavy furniture sitting on the floor and, of course, this needs to be level because you don’t want your TV at an angle because it is on a TV stand which in turn is on a floor with dips and bumps in it.

At UK Screeds, we are not only a screeding installation company, but we also install underfloor heating. This is becoming more and more popular as people realise all the benefits when compared with a radiator system.

One of the most important considerations when planning the construction of a building, or buildings, is the timing of the work on site. All of the various trades need to work on the site in the right order and at the right times, so one needs to follow another as quickly as possible in order to keep costs to a minimum and ensure that the project is not delayed. If you have labour hanging around idle, those people still need to be paid, and that means that somebody, somewhere along the line, is going to have to do the paying. Time is of the essence.