There has been a considerable increase in the use ofpumpable calcium sulphate screeds over the last few years because of the many benefits which they provide over and above traditional sand and cement screeds. They consist of anhydrous (dry) calcium sulphate and aggregates rather than a cement-based binder.

When you are in the process of constructing a new building, one of the most important factors is the flatness of the floor. It needs to be as level as possible, and for this reason you don’t want to fit it directly to a concrete substrate which is itself not level. For this reason, it is necessary to cover the substrate with a screed, either the traditional sand and cement variety or the modern liquid screed which uses anhydrous calcium sulphate in place of the cement as a binder.

If youare installing underfloor heating in a building in Marlow, whether it is a new build or retrospective, you will need to install a floor screed in order to cover the heating pipes and to provide a flat and level surface upon which to lay the final flooring.

Floor screeds are not a legal requirement when you are building a new home, or for that matter any other type of property. However, you do want the flooring to be as flat and level as possible and this is particularly important with modern precast concrete beam and block floors, which have a distinct camber that can cause problems when it comes to laying floor finishes.

When you are laying a floor screed in High Wycombe, you have a choice of the traditional sand and cement screed or the 21^st century variety which is a liquid screed. The latter has many advantages over and above the older mix, not the least of which is the speed of laying.

Underfloor heating is the 21^st century way to heat your home, even though it has been in use for 7,000 years. Back in the day, they used to cut channels in the floor and cover them with stones. These were heated using strategically placed fires.

One of the most important things to factor into the construction of a new building is the flooring. Whatever type of flooring has been chosen, the surface upon which it is laid needs to be as flat and level as possible. This is critical in the case of things which are going to be fixed with an adhesive, such as tile or stone. If a tile is not laid on a completely level surface it can very easily crack as it gets walked on.

If you are considering using a liquid screed in Reading on a contract, you have probably read all about the many advantages that it has over and above the traditional type of sand and cement screed. However, you may also be asking yourself if liquid screeds have any disadvantages, and the answer is that, yes, they do. That is if you consider them disadvantages.

If you are working on a construction project and need to level out the substrate before laying the final flooring, you may be asking yourself about the benefits of flowing screed in Gloucestershire. After all, they are a relatively recent addition to the construction industry, but why do people claim that they are so much better than a simple sand and cement screed?

Underfloor heating is nothing new. Indeed, it goes back at least 7,000 years when people used to cut trenches into the floors and cover them with stones which were heated from fires placed at strategic points within the building. However, things have come on apace since then, and today we have underfloor heating which can be either electric or a water-based system.